X250 Compost Extractor

Our X250 Compost Extractor uses water jets to efficiently dislodge beneficial microorganisms from compost. Compost is loaded into the hopper, which is equipped with a water agitation system that breaks static friction along its edges, dislodging material and promoting an uninterrupted flow.

An auger transports the compost into the extraction chamber, where water jets placed strategically along the auger rinse the material. A booster pump ensures sufficient water pressure is applied to extract microbial communities without damaging them. A cylindrical sieve encases the auger and water jet system, and microbes are rinsed through the screen into the catch basin. The sieve is easily interchangeable, allowing for the use of different mesh screens to achieve various levels of filtration and sediment load.

By adjusting the auger speed, operators can fine-tune the concentration of the extract, since water flow rate is constant. This allows precise control over extract dilution and a consistent final product.

Key Features

• Produces up to 500 gallons of extract per hour
• Patent pending stepped auger design prevents overloading extraction chamber for dependable operation
• Allows easy and precise control of extract concentration
• Water agitation prevents bridging in the hopper
• Optional hopper extension holds 36 gallons of compost, allowing an hour of run time without reloading
• Choice of bench mount for gravity flow, stationary stand with transfer pump or cart with transfer pump
• Slip clutch protects motor in the event of auger jam

Is the Bio-Extractor a good investment for you?

Use our Extractor ROI Planner to find out:

OPEN TOOLS

Inlet and Discharge hose connection sizes.

• Water supply connections: 1" female camlock.

• Extract discharge connection: 2" male camlock on all options.

• If the transfer pump was not purchased, a 4 ft length of 2" hose with female camlock is supplied with the extractor for discharge into a receptacle positioned by the catch basin discharge.

Hopper Options

• Small hopper: 12 gal capacity
• With hopper extension: 36 gal capacity

Electrical Supply

• 120 VAC, 1PH, 60 Hz

Bench Top Option Specs:

• L 58" x W 21" x H 23", 95 lbs.
• Weight and height vary depending on options.

Cart and Stand Options

• L 58" x W 28" x H 48", weight and height vary depending on options.
• Optional single-phase 120 VAC extract transfer pump (see pump options).

Pump Options

• The electrical box on the extractor includes a plug to power a 120v transfer pump.
• The extract transfer pump is available with the stand and cart options. It allows for easy transfer of extract into a large holding tank or sprayer.
• It is a standalone pump with an internal float switch that triggers the pump to run automatically when filled with liquid.
• Transfer pump can be purchased as an after-sale upgrade.

Cleaning spray hose

• Optional on all models and is available separately.

Product Manual

X250 EXTRACTOR MANUAL.PDF

Learn more about Liquid Compost Extract

COMPOST EXTRACT RESOURCE GUIDE.PDF

Support

Schedule a free call with our TECHNICAL SUPPORT team if you would like more information on which extractor is best for you.